Shure DP11EQ Manuel d'utilisateur télécharger pdf (Page 29)

English –

APPENDIX B. RACK MOUNTING THE DP11EQ

The DP11EQ comes in a

-rack chassis specially designed for sturdiness. The sagging and

bending found in most

-rack designs is eliminated — the brackets and straddle bars are designed

to ensure that the units will be installed securely.

WARNING: Do not torque the screws too tightly, or the chassis may be dam-

aged.

Single Unit

DATA

1. Align the supplied rack-mount brackets over the holes.

2. Fasten with the 8 supplied screws.

Dual-Mounted Units

DATADATA

1. Align two units side by side so that the front panels both face the same direction.

2. Place the supplied straddle bars in the recesses on the top and bottom of the units, so

that they overlap both. Fasten with the supplied screws.

NOTE: Be sure to use both straddle bars when installing dual units.

3. Position the rackmount brackets over the holes in the side of the unit. Fasten with the

supplied screws.

Mounting in an Equipment Rack

SINGLE MOUNT

DUAL MOUNT

DATADATA

DATA

1. Insert the unit(s) into a 19-inch equipment rack.

2. Fasten the unit(s) to the rack using all four of the supplied screws.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

Pas de commentaire

Shure DP11EQ Manuel d'utilisateur Page 29