Shure DP11EQ Manuel d'utilisateur télécharger pdf (Page 13)

English –

Dynamics Parameters

The edit boxes are used to adjust the parameters of each dynamics process. This section gives

general definitions of the parameters. See

Dynamics Processes

for more specific information.

THRESHOLD. The Threshold parameter

determines the input level at which dynamics

processing begins. For the gate and the

expander, processing is activated by signal levels

below

the threshold. The AGC, the compressor,

the limiter, and the peak limiter are triggered by

signal levels

above

the threshold. To adjust the

threshold, click and drag the “T” box at the top of

the graph, or click on the ↑ and ↓ buttons of the

THRESHOLD edit box.

ATTACK. The Attack parameter controls the

amount of time it takes for a gain change to take

full effect once a threshold has been crossed. To

adjust the attack, click on the ↑ and ↓ buttons of

the ATTACK box, or type the desired value in the

edit box.

RATIO. The Ratio determines how much the

processor will affect the sound. For example, if the

compressor is set to a ratio of 2:1, for every 2 dB

increase of the input signal above the threshold,

the increase of the output signal will be only 1 dB.

To adjust the ratio, click and drag the “R” box at the

right side of the graph, or click on the ↑ and ↓

buttons of the RATIO edit box.

DECAY. The Decay parameter controls the time

it takes for the gain to return to unity once the

selected process is complete. To adjust the decay,

click on the ↑ and ↓ buttons of the DECAY box, or

type the desired value in the edit box.

Auxiliary Box. This control functions differently

for each dynamics process. See the

Dynamics

Processes

section following for definitions.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

Commentaires sur ces manuels

Pas de commentaire

Shure DP11EQ Manuel d'utilisateur Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement musical Shure DP11EQ