Shure P4HW Manuel d'utilisateur télécharger pdf (Page 7)

MONO, STEREO AND MIXMODE CONTROL

The bodypack provides simple configuration of a monitor mix and enables the user to customize

an individual mix in a multiple mix environment. Three monitoring modes are available - mono,

stereo, and MixMode.

Mono: The bodypack receives one signal from the mixer and sends that signal to both earphones.

For mono signals, use MixMode (MIX ON).

Stereo: The bodypack receives two signals (L and R) from the mixer and sends the signals to the

left and right earphones, respectively. The balance knob adjusts the balance between the left and

right earphones. For stereo signals, use the MIX OFF setting.

MixMode: Allows the performer to easily adjust the monitor mix during the performance. In Mix-

Mode, the bodypack receives two signals, such as a band mix and a vocal mix. The balance knob

adjusts the mix of these two signals. The mixed signal is sent to both the left and right earphones.

For example, if the band is overpowering the vocals in the mix, the vocal levels can be increased

and the band mix level decreased by simply adjusting the balance knob.

USING MIXMODE

1/L

2/R

1/L

2/R

1/L

2/R

1/L + 2/R

Signal From

Audio Source

Signal From

Audio Source

STEREO

MIXMODE

MIXED

Step Four: The user may continue to

adjust the mix using the balbance knob

throughout the performance.

MIXMODE channel 1

MIXMODE channel 2

MID-POINT CLOCKWISECOUNTERCLOCKWISE

Step Two: Using the balance knob,

the user blends the two signals until

the correct mix is achieved.

Step One: The bodypack

receives TWO signals

from the audio source.

Step Three: The bodypack sends the

mixed signal to both channels of the

earphones.

1 2 3 4 5 6 7 8 9

Commentaires sur ces manuels

Pas de commentaire

Shure P4HW Manuel d'utilisateur Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour guitare Shure P4HW