Shure P4HW Manuel d'utilisateur télécharger pdf (Page 4)

Operation

BATTERY INSTALLATION

1. Open the battery door by pushing down and sliding towards cable.

2. Insert a fresh 9 V alkaline battery with the +/– terminals properly positioned (see Figure 1).

3. Close the battery door.

NOTE: If battery compartment door will not close, the battery is not properly inserted.

FIGURE 1

CONNECTING TO MIXER AND CHECKING SIGNAL

1. Connect the “Y” cable of the bodypack to a line level audio source.

2. Turn the ON/OFF/VOLUME knob clockwise past click (ON).

3. Observe input level meter in LCD screen. Adjust the level of audio source so the outside indi-

cators of the meter flicker occasionally.

4. Plug earphones into earphone output jack.

5. Insert earphones into ears as instructed in the earphone user's guide.

6. Increase the volume slowly to a comfortable listening level.

7. Attach the bodypack to a belt or guitar strap.

1 2 3 4 5 6 7 8 9

Pas de commentaire

Shure P4HW Manuel d'utilisateur Page 4