Shure BETA98HC Manuel d'utilisateur télécharger pdf (Page 4)

ENGLISH

APPLICATIONS AND PLACEMENT

The most common BETA 98H/C applications and placement techniques are described below. Keep in mind that micro-

phone technique is largely a matter of personal taste; there is no one “correct” microphone position.

SAXOPHONE (see Figure 4): Clamp the microphone onto the bell of the saxophone, so the microphone is a few inches

from and facing into the bell. This will produce a bright tonal balance while minimizing feedback and leakage.

SOPRANO SAXOPHONE (see Figure 5): Clamp the microphone onto the bell of the saxophone and adjust the gooseneck

so the microphone is facing the keys of the instrument, a few inches from the lower keys. This will produce a warm and

full tonal balance. For a brighter tone, adjust the gooseneck so the microphone is facing into the bell, a few inches away.

TROMBONE PLACEMENT (see Figure 6): Clamp the microphone onto the bell of the trombone and adjust the goose-

neck so the microphone is facing directly into the bell, a few inches away. This will produce a bright tonal balance while

providing maximum isolation.

TRUMPET PLACEMENT (see Figure 7): Clamp the microphone onto the bell of the trumpet and adjust the gooseneck

so the microphone is facing directly into the bell, a few inches away. This will produce a bright tonal balance while provid-

ing maximum isolation.

DRUM PLACEMENT (see Figure 8): Clamp the microphone onto the drum rim and adjust the gooseneck so the micro-

phone is aiming a few inches above the drum head and an inch from the rim. This provides a full tonal balance.

1 2 3 4 5 6 7 8 9 ... 13 14

Pas de commentaire

Shure BETA98HC Manuel d'utilisateur Page 4