Shure P4800 Guide d'installation

Model P4800 System Processor Installation Guide27B8695 (Rev. 3)2007, Shure IncorporatedPrinted in U.S.A.Patent No. 5,999,631

ENGLISH9279.4 mm(11 IN.)431.0 mm(16–31/32 IN.)443.7 mm(17–15/32 IN.)482.6 mm(19 IN.)274.6 mm(10-13/16 IN.)76.2 mm(3 IN.)4.76 mm(3/16 IN.)DIMENSIONSFig

SHURE Incorporated http://www.shure.comUnited States, Canada, Latin America, Caribbean:5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.Phone: 847-6

ENGLISH1 DESCRIPTION The P4800 System Processor is a 4-input, 8-output digital audio processor. It performs all the necessary functions between

ENGLISH2REQUIREMENTS PowerS 100–240 Vac, 50/60 HzS 60 W maximumComputerS20 MB of hard drive spaceS CD ROM driveS RS–232 or RS–422 serial portS 9–pin s

ENGLISH3AUDIO CONNECTIONS NOTE: The P4800 ships with a blank configuration. Audio will not pass from the inputs to the outputs until it has been confi

ENGLISH4COMPUTER CONNECTIONS RS-232Connect the COM port on your computer to one of the 9-pin RS-232 connectors on the P4800 device using a male-to-fem

ENGLISH5DIP Switch Settings for Networked DevicesS Make sure the SHURE LINK/MIDI DIP switch is in the UPposition (see Figure 7).S Assign each device a

ENGLISH6Control Input PinsPreset ControlFigure 9 shows examples of how to connect different types of preset control hardware to the Control Input pins

ENGLISH7Preset Logic OutputLEDsBINARYLOGICHARDWARE+5VOne-to-One/BinaryConfigurationsBinary Configuration5V dc Relays500Ω Resistors**Necessary for LEDs

ENGLISH8AMX/CRESTRON CONTROLThe P4800 uses a standard 7 wire RS–232 port for control. Crestron and AMX controllers use 5 wire RS–232. In order to use